Lite synt att den blev breddad med dom lite fulare "944" breddarna, men det var väl tvunget för att uppdatera till GT3 spec. En bit rejsinghistoria, som hittat:)
Here is a link to pictures: https://picasaweb.google.com/1043849346 ... ab149WdiwE" onclick="window.open(this.href);return false;
Credit for much of this write-up goes to bring-a-trailer and was copied from the advertisement from a couple of year ago.
This 1980 Porsche 933 is one of sixteen 924 chassis cars factory developed in Weissach and delivered to Holbert Racing in Pennsylvania in preparation for SCCA D-Production competition. This was Holbert chassis #2, serial number 92A0490002, which at the hands of its first owner competed in D-Production and when that class was eliminated it was upgraded to GT-3 specs. With its second owner at the wheel, the car became arguably the most successful GT-3 924 in history, with six track records, an overall NASPORT championship and 4th at the runoffs in 1991. A number of period pictures, articles, factory letters and race results are included. Although the car has only one test day on it since a complete engine, trans, and shock rebuild, it has been in storage since 2006 and needs freshening
These cars were designed by the factory to race in SCCA D Production Championship. The Porsche project number of these race cars was 933. Only 16 were built by the factory. If you had the right connections, you could buy the parts as a kit from Porsche to convert your street car into a fully race-ready 924.
Internal factory number: 933
- Launched on April 26, 1979, as Project 924/80.
- US SCCA Racers – 16 total (1980, 92A0490001-92A0490016)
- Designed and assembled at Weissach.
- Assembly and tuning finished at Warrington, Pennsylvania by Al Holbert.
Ownership history of 1980 Porsche 924 DP – #92A0490002 – “Holbert car # 2”
Stefan Edlis:
Originally purchased through, and built by, Holbert Racing in Warrington, PA and raced under Apollo Plastics livery (car #10 and #15) in SCCA D-Production and GT-3 classes. The car was heavily modified to compete in GT-3 by David Finch, owner of Raetech Motorsports Engineering of Ann Arbor, MI. The suspension and chassis were completely redesigned. Extensive lightening, gusseting and other custom fabrication is visible everywhere. (Finch is a 6-time SCCA GT-2 National Champion driving in a Porsche 944. Finch used the knowledge gained from the Edlis conversion for his own 944 GT-2 build.) Finch believes that Holbert only built 3 complete factory cars: One that Doc Bundy drove to the 1980 DP championship, Edlis’s car and a show car now owned by Tom Brennan.). Edlis raced against and ultimately with Tom Brennan (1981 SCCA DP National Champion in Holbert 924 DP # 1).
Don Meluzio:
Purchased car from Edlis in 1988. Meluzio ran the car under Porsche Model Club livery (car #53). Meluzio won NASPORT championship in 1991 (12 wins, 9 poles, 6 track records) and again 1994. Third in Runoffs in 1989, fourth in 1991 (continuous Runoffs in the 924 from 88-92). Meluzio finished 9th in 1991 Porsche Cup, 15th in 1989 Porsche Cup and traveled to Germany for the ceremonies. Letters from Jürgen Barth (Porsche Head of Customer Racing) and Bob Carlson (Porsche Manager of Racing) congratulating him on his success. The car held the GT-3 track record at 6 tracks, including Lime Rock Park for many years with a 0:58 second lap. It has dozens of SCCA National Event wins to its credit. Meluzio’ s crew chief was Vic Biser. Michael Stimpson did the head and cam work.
Tom Scheuren:
Scheuren ran the car under the Diablo Racing banner (car #53) in SCCA regional and national events from 1993 – 1998. The car was parked in favor of a GT-1 effort in the Rolex Endurance Series. In 2005, Scheuren had the engine, trans and shocks rebuilt and it only one test day at Watkins Glen. It has been in storage since 2006.
This 924 would be competitive in SCCA GT-3 today and would likely dominate the small bore classes of SVRA and PCA. Due to the extended storage, the seller suggests that the head will need to be pulled to replace valve springs, fluids changed, seat belts updated ect before taking it to the track.
This car has been extensively modified, it doesnt have a vin number but the parts alone are worth more then the asking price and the history on the car is solid. It will be sold with a bill of sale.
The Engine is currently disassembled to a short block. The seller is willing to crate the parts or reassemble the engine for shipping for a fee. This is negotiable.
I’m listing this car for a friend of mine, I’m not the owner. Please get in touch with me, I'm David 503-860-4740 or email davehanning@aol.com let’s have a brief conversation and then I’ll put you in touch with the seller.
This car is located in New Port Richey, Florida (West coast, North of Tampa).
The asking price is $22,000
Den tidigare annonsen på bilen:
http://bringatrailer.com/2011/05/19/bat ... ory-racer/" onclick="window.open(this.href);return false;
…F-n också, nu kom det dregel på tangentbordet
